五分快三技巧歡迎您的到來!

當前位置:網站首頁 > 新聞中心 > 行業新聞
行業新聞
  • 産品絲印加工前需要注意哪些方面

  • 本站編輯:xghl發布日期:2017-10-18 09:17 浏覽次數:
産品絲印圖案,聽起來似乎很簡單,但在絲印加工前,要注意的地方有很多,隻有把控好了,絲印出來的圖案才會達到理想的效果。需要注意以下幾點:
The silk screen design seems to be very simple, but there are many points to be noticed before screen printing. Only when we control the silk print, can we achieve the desired effect. We need to pay attention to the following points:
 
1. 絲印加工廠車間的清潔度,對絲印車間、制版車間盡量保證空氣中沒有灰塵,否則會影響印刷質量。兄輝電子有萬級無塵車間,安裝了空氣淨化設備,以保持印刷、制版車間的清潔。
1. the cleanliness of the workshop of the silk printing factory, to ensure that there is no dust in the air of the screen printing shop and the plate making workshop, otherwise the printing quality will be affected. My brother Hui Electronics has a ten thousand dustless workshop, and the air cleaning equipment is installed to keep the printing and plate making workshop clean.
2.溫度和濕度的要求,四季溫差濕度變化很大,對印刷精度影響也相對較大,特别是多色套印,影響更為明顯,所以,要求室内濕度、溫度要相對穩定,并根據季節變化适當調整室内的溫度和濕度,以保證印刷尺寸精度。
2. requirements of temperature and humidity, temperature difference between the seasons and humidity varies greatly, the impact of the printing precision is relatively large, especially the multicolor overprint effect is more obvious, therefore, the requirements of indoor temperature and humidity should be relatively stable, and according to the seasonal variation of adjusting indoor temperature and humidity, to ensure the printing precision.
3.了解産品的性質,現在絲印産品材料種類繁多,形狀也有所不同,在絲印加工前要根據不同的要求選擇适當的油墨和溶劑以及刮闆等。
3., understand the nature of the product. Now there are various kinds and shapes of screen printing products. We should select the appropriate ink and solvents and scrapers according to different requirements before screen printing.
 
另外,特殊的産品一定要做絲印加工前做下表面處理,不然絲印上去的油漆附着力不好,容易掉漆。
In addition, the special product must do the surface treatment before the silk printing process, otherwise the paint adhesion on the silk screen is not good, it is easy to drop the paint.